Fresno Elite Epoxy Flooring provides professional esd & anti-static flooring in Fresno, CA for residential and commercial properties across the Central Valley. ESD flooring exists to give a static charge somewhere to go other than through a component, a person, or an atmosphere that would rather not be ignited.
Walking across an ordinary insulating floor in a dry Valley summer generates thousands of volts of static on a person, and a discharge far below what anyone can feel will damage sensitive electronics permanently, often without failing outright, which is worse because it fails in the field instead of on the bench.
In a facility handling flammable solvents, powders or gases, the concern is not a damaged part, it is ignition. The specification is written in resistance.
Conductive systems typically fall in the range of ten to the fourth through ten to the sixth ohms and drain charge fast, which suits explosive atmospheres and munitions handling.
Static dissipative systems run roughly ten to the sixth through ten to the ninth ohms, draining charge in a controlled way rather than instantaneously, which is what most electronics assembly, server room and medical device work wants, and it is what ANSI ESD S20.20 programs are usually built around.
Choosing between them is not a preference, it is derived from your standard and your process, and we ask for it in writing. The floor is only half the system.
A conductive or dissipative coating needs a path to ground, which means a copper grounding grid laid into the base coat at a defined spacing, tied to the building ground at the required number of points and documented.
The topcoat has to be conductive too, since a nonconductive clear coat over a conductive base defeats the whole installation, and that mistake gets made more often than you would hope.
Then the floor is tested, point to point and point to ground, and the results are recorded so your auditor has a baseline.
Maintenance matters as well: ordinary floor wax or the wrong cleaner will insulate the surface and take a compliant floor out of spec without anyone noticing until a test.
We hand over the cleaning specification along with the test data, and we retest existing floors that have drifted out of range.
With 15+ years of experience, our licensed and insured team brings the right materials and equipment to every job — urethane cement flooring systems, novolac epoxy chemical resistance, quartz broadcast systems, ICRI concrete surface profile, shot blasting and diamond grinding, ASTM F1869 calcium chloride testing — and backs the work with a written workmanship warranty. We serve Fresno and nearby communities including Clovis, Madera, Sanger, Reedley.
What We Handle
Everything our esd & anti-static flooring in Fresno covers
One crew, one point of contact, and the full range of esd & anti-static flooring work in Fresno, CA. If it is on this list we do it in house rather than handing it to a subcontractor:
- ESD flooring
- anti static floor coating
- static dissipative floor
- conductive epoxy flooring
- electronics assembly floor
- grounded floor system
- copper grounding grid floor
- ANSI ESD S20.20 flooring
- cleanroom ESD floor
- server room flooring
- explosive atmosphere flooring
- static control floor testing
Not sure which one describes your situation? Describe it in plain words and we will sort it out — or browse the rest of our Fresno services.
Materials, equipment and how we do esd & anti-static flooring
The difference between esd & anti-static flooring that lasts and esd & anti-static flooring that gets redone in three years is almost always preparation and materials, not the finish you see on day one. We work with urethane cement flooring systems, novolac epoxy chemical resistance, quartz broadcast systems, ICRI concrete surface profile, spec them to the job instead of to the invoice, and write the material grades into the free estimate so you know exactly what you are buying.
Every Fresno job runs the same way: site walk and measurements, written scope and fixed price, protection of the surrounding area, then the work itself with a daily clean-up. 15+ years of epoxy flooring work in the Central Valley means we have already met whatever your property is going to throw at us — awkward access, older construction, an HOA with opinions.
Where we do esd & anti-static flooring outside Fresno
Fresno Elite Epoxy Flooring covers Fresno and the surrounding communities of the Central Valley. Crews run out to the same nearby cities every week, so an out-of-town job does not mean an out-of-town price.
- ESD & Anti-Static Flooring in Clovis, CA — Fresno County, incorporated in 1912, population 120,124 at the 2020 census
- ESD & Anti-Static Flooring in Madera, CA — Madera County, incorporated in 1907, population 66,224 at the 2020 census
- ESD & Anti-Static Flooring in Sanger, CA — Fresno County, incorporated in 1911, population 26,617 at the 2020 census
- ESD & Anti-Static Flooring in Reedley, CA — Fresno County, incorporated in 1913, population 25,227 at the 2020 census
- ESD & Anti-Static Flooring in Selma, CA — Fresno County, incorporated in 1893, population 24,674 at the 2020 census
- ESD & Anti-Static Flooring in Dinuba, CA — Tulare County, incorporated in 1906, population 24,563 at the 2020 census
Start on the Fresno Elite Epoxy Flooring homepage for a free estimate, or call (844) 511-2320 and describe the job.
Why Fresno Chooses Fresno Elite Epoxy Flooring
- ✓Over 15 years of industrial floor work across the Central Valley
- ✓Urethane cement, novolac and quartz systems for real food-plant chemistry
- ✓Shot blasting and diamond grinding, never an acid etch
- ✓Slab moisture tested to ASTM F1869 and F2170 before we quote
The standards behind esd & anti-static flooring
Quality here is not a matter of opinion — it is written down. The esd & anti-static flooring work we do in Fresno follows published industry standards: ASTM International publishes ASTM F1869 and F2170, the slab moisture tests a coating depends on, and American Concrete Institute sets the surface-profile and substrate requirements. If a contractor cannot tell you which standard a detail comes from, that is worth asking about before you sign.
Every esd & anti-static flooring project in Fresno gets the same attention, whether it is a single room or a full commercial job. We show up on schedule, keep the site clean, and stand behind the work — the estimate is free and there is no pressure.
Ready to get started? Call (844) 511-2320 for a free esd & anti-static flooring free estimate in Fresno, or request a quote and we'll get right back to you.