Every Epoxy Flooring Service We Offer in Fresno, CA
One team for every epoxy flooring job in Fresno — from food & beverage plant flooring to patio & pool deck coatings.
Fresno Elite Epoxy Flooring handles residential and commercial epoxy flooring projects across Fresno and the Central Valley. From food & beverage plant flooring to patio & pool deck coatings, every service below is handled by our own team and backed by our workmanship guarantee.
Start on the Fresno Elite Epoxy Flooring homepage, read what people in Fresno say on our about page, or call (877) 335-4158 and describe what you need in your own words.
Epoxy Flooring Work We Do in Fresno
Food & Beverage Plant Flooring
Food and beverage plant flooring is a sanitation specification with a floor attached, and in this valley it is most of what we install. A processing floor has to be jointless and non-absorbent so there is nowhere for product residue and bacteria to live, coved at every wall so there is no ninety-degree corner, sloped correctly to drains so water leaves rather than pools, cleanable at the temperatures and with the chemistry your sanitation crew actually uses, and slip resistant while wet with whatever you process.
Packing House & Ag Floors
Packing house and agricultural processing floors are their own discipline, and the Central Valley has more of them per square mile than almost anywhere on earth. Stone fruit, table grapes, raisins, citrus, tree nuts, tomatoes, melons and everything that moves through a cooler on the way to a truck all pass across concrete, and the combination of wash water, fruit sugar, forklift traffic and a hard seasonal deadline makes these among the most demanding floors we coat.
Cold Storage & Freezer Floors
Cold storage floors fail in ways that surprise people, and almost all of it comes down to temperature moving through materials at different rates. A freezer floor is not simply a cold version of a warehouse floor.
Winery & Brewery Floors
Winery and brewery floors take a chemical beating that most people underestimate, and the culprit is not the product, it is the cleaning. A cellar floor sees tartaric acid from wine, lactic and acetic acid from fermentation, sugar from must and wort, caustic from clean-in-place cycles, peracetic acid and other sanitizers, and then hot water at temperatures that will debond a general-purpose epoxy over time.
Dairy & Creamery Flooring
Dairy floors are attacked by the product itself, which is what makes them different from almost every other food floor. Lactic acid, which forms as milk sours, is genuinely aggressive on cementitious surfaces and on standard epoxy, and it is present everywhere in a dairy operation regardless of how well the crew cleans.
Warehouse & Distribution Floors
Warehouse and distribution floors are an operations problem before they are a coating problem, and the business case usually comes down to dust, light and joints. An uncoated slab abrades under hard-wheeled traffic and generates concrete dust continuously, which lands on inventory, gets into equipment bearings and packaging, and is a permanent low-grade cost nobody puts a number on.
Urethane Cement Flooring
Urethane cement is the toughest flooring system we install and it is the correct answer for most wet processing environments in the Central Valley. It is a hybrid: polyurethane resin combined with cement and graded aggregate, trowel or screed applied at anywhere from about three-sixteenths to a quarter inch, and it behaves less like a coating and more like a new wearing surface bonded to the slab.
Quartz Broadcast Systems
A quartz broadcast system is the middle ground between a thin decorative coating and a full mortar floor, and it is one of the most useful builds in commercial work. Colored ceramic-coated quartz aggregate is broadcast into a wet epoxy base until the surface will absorb no more, the excess is swept and vacuumed, and then one or two clear or pigmented topcoats lock it in.
ESD & Anti-Static Flooring
ESD flooring exists to give a static charge somewhere to go other than through a component, a person, or an atmosphere that would rather not be ignited. Walking across an ordinary insulating floor in a dry Valley summer generates thousands of volts of static on a person, and a discharge far below what anyone can feel will damage sensitive electronics permanently, often without failing outright, which is worse because it fails in the field instead of on the bench.
Chemical-Resistant Flooring
Chemical-resistant flooring starts with a list, not a product. What lands on this floor, at what concentration, at what temperature, and how long before somebody cleans it up.
Medical & Cleanroom Flooring
Cleanroom and medical flooring is specified for what it does not do: it does not shed particles, it does not have joints for contamination to hide in, it does not react with the disinfectants used on it, and it does not create a surface that is hard to validate. Every one of those requirements pushes toward a monolithic self-leveling resinous floor with continuous integral coving and no seams anywhere, which is why tile and sheet goods keep losing ground in these spaces.
Concrete Grinding & Shot Blasting
Fresno Elite Epoxy Flooring provides concrete grinding and surface prep for Valley slabs before any resin or polish work begins. Valley concrete hides dust, irrigation stains, and soft paste under a skin that looks fine until coating peels.
Moisture Vapor Mitigation
Moisture vapor mitigation is the step that separates a floor that lasts from a floor that blisters, and it gets skipped constantly because it is invisible and it costs money before anything looks like progress. Concrete is porous.
Concrete Polishing & Densifying
Polished concrete is a finish rather than a coating, which is the entire reason to choose it: there is no film on top to blister, delaminate, yellow or peel, because the floor is the slab itself. We refine it mechanically with progressively finer diamond abrasives and harden it chemically with a lithium silicate densifier that reacts with free lime in the concrete to produce a denser, tighter, far more abrasion-resistant surface.
Floor Repair & Joint Filling
Joint filling is the highest-return maintenance work in any building with hard-wheeled traffic, and it is almost always deferred until the damage costs ten times what the filler would have. Here is the mechanism.
Line Striping & Safety Marking
Fresno Elite Epoxy Flooring stripes warehouse floors across the Central Valley logistics belt under heat and dust. Dust and pallet traffic erase weak paint before the next safety walk.
Garage Floor Coatings
Fresno Elite Epoxy Flooring coats Central Valley garages that bake in summer and take dust and hard-water drip all year long. Valley heat turns a closed garage into an oven by late afternoon from spring through early fall on most lots.
Flake Floor Systems
Fresno Elite Epoxy Flooring installs flake epoxy floors for Valley garages and light commercial bays that want hide-the-dust texture. Flake is popular here because valley dust and hard-water spots show less than on a solid field under bright afternoon light.
Metallic Epoxy Floors
Fresno Elite Epoxy Flooring installs metallic epoxy for Valley showrooms and feature rooms that want movement under hard daylight. Metallic pigment behaves differently under Central Valley sun than under soft coastal light.
Polyaspartic & Polyurea Coatings
Polyaspartic and polyurea coatings solve the two problems epoxy cannot: sunlight and downtime. Polyaspartic is an aliphatic polyurea, and aliphatic chemistry does not amber under ultraviolet light the way epoxy inevitably does, so any floor that sees sun through a roll-up door, a skylight or a storefront window needs one on top or it will yellow and eventually chalk.
Commercial Epoxy Flooring
Fresno Elite Epoxy Flooring builds commercial epoxy floors for Valley offices, retail back-of-house, and light industrial suites under hard sun and dust. Valley commercial slabs face dust infiltration, irrigation-driven moisture swings, and brutal afternoon heat through glass.
Commercial Kitchen & Restaurant Floors
Commercial kitchen flooring gets judged by a health inspector at the wall junction and by your own crew at the dish pit, and those two audiences want different things from the same slab. Fresno kitchens usually fail the first test, because quarry tile grout is porous and once the joints open the floor becomes a reservoir for grease and organic soil that no mop reaches.
Showroom, Retail & Office Floors
Fresno Elite Epoxy Flooring installs showroom and retail floors that must stay clean under bright Valley light and steady daily foot traffic. Retail slabs take dust, winter mud, and hard sun through storefront glass across long clear afternoons.
Solid Color Epoxy Coatings
Fresno Elite Epoxy Flooring pours solid-color epoxy when Valley clients want a simple, clean field without broadcast texture. A solid field is a prep exam under clear Central Valley light.
Patio & Pool Deck Coatings
Pool deck and patio coatings are the one corner of this trade where the wrong resin fails on schedule, and in Fresno the wrong resin is standard epoxy. Epoxy is an aromatic chemistry, so ultraviolet light ambers it and eventually chalks it, and a smooth dark film on an exposed slab stores heat until nobody will cross it barefoot in July.
What each of our services covers in Fresno
Open any service to see exactly what is included before you call.
Food & Beverage Plant Flooring
Food and beverage plant flooring is a sanitation specification with a floor attached, and in this valley it is most of what we install.
A processing floor has to be jointless and non-absorbent so there is nowhere for product residue and bacteria to live, coved at every wall so there is no ninety-degree corner, sloped correctly to drains so water leaves rather than pools, cleanable at the temperatures and with the chemistry your sanitation crew actually uses, and slip resistant while wet with whatever you process.
Then it has to survive being cleaned that way twice a day for a decade.
- food plant flooring
- food processing floor coating
- USDA approved flooring
- FDA compliant floor
- urethane cement food plant
- cannery floor coating
- thermal shock resistant flooring
- integral cove base flooring
- wash down floor system
- beverage plant flooring
- sanitary floor coating
- processing plant floor repair
Packing House & Ag Floors
Packing house and agricultural processing floors are their own discipline, and the Central Valley has more of them per square mile than almost anywhere on earth.
Stone fruit, table grapes, raisins, citrus, tree nuts, tomatoes, melons and everything that moves through a cooler on the way to a truck all pass across concrete, and the combination of wash water, fruit sugar, forklift traffic and a hard seasonal deadline makes these among the most demanding floors we coat. The specific abuse is worth naming.
- packing house floor coating
- agricultural processing floor
- fruit packing floor
- nut hulling plant floor
- raisin plant flooring
- produce cooler floor
- grading line floor coating
- citrus packing house floor
- ag facility floor repair
- seasonal shutdown flooring
- forklift traffic ag floor
- wash line floor system
Cold Storage & Freezer Floors
Cold storage floors fail in ways that surprise people, and almost all of it comes down to temperature moving through materials at different rates. A freezer floor is not simply a cold version of a warehouse floor. It is a slab holding a steep temperature gradient, with moisture in the air condensing and freezing wherever it finds a surface below dew point, and with materials contracting and expanding every time a door opens or a defrost cycle runs.
- freezer floor coating
- cold storage floor
- blast freezer flooring
- cooler floor coating
- low temperature floor system
- thermal cycling floor
- refrigerated warehouse floor
- freezer dock transition
- moisture under freezer slab
- urethane cement freezer
- cold room floor repair
- produce cooler flooring
Winery & Brewery Floors
Winery and brewery floors take a chemical beating that most people underestimate, and the culprit is not the product, it is the cleaning.
A cellar floor sees tartaric acid from wine, lactic and acetic acid from fermentation, sugar from must and wort, caustic from clean-in-place cycles, peracetic acid and other sanitizers, and then hot water at temperatures that will debond a general-purpose epoxy over time.
It also takes forklift traffic with loaded barrels and bins, dropped equipment, and standing water in every low spot from crush through bottling.
- winery floor coating
- brewery floor coating
- crush pad coating
- tartaric acid resistant floor
- barrel room flooring
- tasting room concrete floor
- caustic resistant floor
- hot water wash down flooring
- trench drain lining
- distillery floor coating
- cellar floor coating
- beverage production flooring
Dairy & Creamery Flooring
Dairy floors are attacked by the product itself, which is what makes them different from almost every other food floor. Lactic acid, which forms as milk sours, is genuinely aggressive on cementitious surfaces and on standard epoxy, and it is present everywhere in a dairy operation regardless of how well the crew cleans.
Add butterfat, which softens some resin systems and turns a floor into a skating rink, whey, which is acidic and gets everywhere in a cheese plant, and hot water and caustic sanitation twice a day, and you have a chemical and thermal exposure profile that eliminates most of the products on the market.
- dairy floor coating
- creamery flooring
- cheese plant floor
- milk processing floor coating
- lactic acid resistant floor
- milking parlor flooring
- butterfat resistant coating
- hot water sanitation flooring
- dairy USDA floor
- whey resistant floor system
- cheese room floor repair
- milk truck bay coating
Warehouse & Distribution Floors
Warehouse and distribution floors are an operations problem before they are a coating problem, and the business case usually comes down to dust, light and joints. An uncoated slab abrades under hard-wheeled traffic and generates concrete dust continuously, which lands on inventory, gets into equipment bearings and packaging, and is a permanent low-grade cost nobody puts a number on.
A light-colored coating reflects a large share of the light that reaches it, which cuts the fixture count and the energy needed to hit a target light level over hundreds of thousands of square feet.
- warehouse floor coating
- distribution center flooring
- forklift traffic floor
- high build epoxy warehouse
- joint filler warehouse
- dust proofing concrete slab
- aisle striping warehouse
- loading dock floor coating
- abrasion resistant coating
- fulfillment center floor
- shot blasted floor prep
- logistics facility flooring
Urethane Cement Flooring
Urethane cement is the toughest flooring system we install and it is the correct answer for most wet processing environments in the Central Valley. It is a hybrid: polyurethane resin combined with cement and graded aggregate, trowel or screed applied at anywhere from about three-sixteenths to a quarter inch, and it behaves less like a coating and more like a new wearing surface bonded to the slab. Two properties make it the right material where epoxy fails.
- urethane cement flooring
- urethane mortar floor
- thermal shock resistant floor
- steam clean resistant flooring
- cementitious urethane system
- heavy duty industrial floor
- moisture tolerant floor system
- food grade floor mortar
- high temperature floor coating
- self leveling urethane
- trowel applied urethane floor
Quartz Broadcast Systems
A quartz broadcast system is the middle ground between a thin decorative coating and a full mortar floor, and it is one of the most useful builds in commercial work.
Colored ceramic-coated quartz aggregate is broadcast into a wet epoxy base until the surface will absorb no more, the excess is swept and vacuumed, and then one or two clear or pigmented topcoats lock it in.
What you end up with is a floor typically running an eighth to a quarter inch thick, with genuine mechanical strength, real slip resistance built into the surface rather than added to the top coat, and a granular appearance that hides soil and wear far better than a solid color.
- quartz broadcast flooring
- colored quartz floor system
- double broadcast quartz
- epoxy quartz flooring
- slip resistant quartz floor
- commercial restroom flooring
- locker room floor coating
- impact resistant floor system
- decorative quartz aggregate
- school and gym flooring
- laboratory quartz floor
ESD & Anti-Static Flooring
ESD flooring exists to give a static charge somewhere to go other than through a component, a person, or an atmosphere that would rather not be ignited.
Walking across an ordinary insulating floor in a dry Valley summer generates thousands of volts of static on a person, and a discharge far below what anyone can feel will damage sensitive electronics permanently, often without failing outright, which is worse because it fails in the field instead of on the bench.
In a facility handling flammable solvents, powders or gases, the concern is not a damaged part, it is ignition.
- ESD flooring
- anti static floor coating
- static dissipative floor
- conductive epoxy flooring
- electronics assembly floor
- grounded floor system
- copper grounding grid floor
- ANSI ESD S20.20 flooring
- cleanroom ESD floor
- server room flooring
- explosive atmosphere flooring
- static control floor testing
Chemical-Resistant Flooring
Chemical-resistant flooring starts with a list, not a product. What lands on this floor, at what concentration, at what temperature, and how long before somebody cleans it up. Those four answers determine the resin, and there is no system that resists everything: a floor that laughs off battery acid can soften under a solvent, and one rated for occasional splash will fail under standing immersion.
- chemical resistant flooring
- novolac epoxy floor
- acid resistant floor coating
- secondary containment lining
- battery room floor
- laboratory floor coating
- solvent resistant flooring
- vinyl ester floor system
- fertilizer plant flooring
- chemical storage floor
- corrosion resistant coating
- spill containment floor
Medical & Cleanroom Flooring
Cleanroom and medical flooring is specified for what it does not do: it does not shed particles, it does not have joints for contamination to hide in, it does not react with the disinfectants used on it, and it does not create a surface that is hard to validate.
Every one of those requirements pushes toward a monolithic self-leveling resinous floor with continuous integral coving and no seams anywhere, which is why tile and sheet goods keep losing ground in these spaces.
The build is usually a self-leveling epoxy or a methyl methacrylate system depending on the cure time available, installed at a thickness that produces a smooth, non-porous, easily disinfected surface.
- cleanroom flooring
- medical facility floor coating
- pharmaceutical floor system
- operating room flooring
- antimicrobial floor coating
- ISO cleanroom floor
- laboratory floor coating
- cannabis cultivation floor
- dental and veterinary flooring
- self leveling epoxy floor
- integral cove medical floor
- sterile environment flooring
Concrete Grinding & Shot Blasting
Fresno Elite Epoxy Flooring provides concrete grinding and surface prep for Valley slabs before any resin or polish work begins. Valley concrete hides dust, irrigation stains, and soft paste under a skin that looks fine until coating peels. Grinding cuts through that skin to a bondable profile and exposes crack maps from expansive soils after water season.
- concrete shot blasting
- concrete grinding service
- surface preparation contractor
- ICRI surface profile
- coating removal service
- mastic and glue removal
- concrete scarifying
- floor prep before coating
- dust free concrete grinding
- warehouse floor prep
- acid etching alternative
- concrete profiling
Moisture Vapor Mitigation
Moisture vapor mitigation is the step that separates a floor that lasts from a floor that blisters, and it gets skipped constantly because it is invisible and it costs money before anything looks like progress. Concrete is porous. Water moves upward through a slab by capillary action and vapor drive, and when you seal the top with a coating, that vapor has nowhere to go and builds pressure at the bond line until the floor delaminates in blisters or sheets.
- concrete moisture vapor mitigation
- moisture vapor barrier coating
- ASTM F1869 calcium chloride test
- ASTM F2170 relative humidity test
- slab moisture testing
- flooring failure moisture
- high MVER slab
- vapor barrier primer
- green concrete flooring
- moisture tolerant floor system
- concrete slab humidity test
- delamination from moisture
Concrete Polishing & Densifying
Polished concrete is a finish rather than a coating, which is the entire reason to choose it: there is no film on top to blister, delaminate, yellow or peel, because the floor is the slab itself.
We refine it mechanically with progressively finer diamond abrasives and harden it chemically with a lithium silicate densifier that reacts with free lime in the concrete to produce a denser, tighter, far more abrasion-resistant surface. Maintained sensibly it does not get replaced, it gets re-burnished.
- polished concrete floor
- concrete densifier
- grind and seal concrete
- warehouse floor polishing
- retail polished concrete
- burnished concrete floor
- aggregate exposure polishing
- concrete floor gloss level
- dust proofing concrete
- lithium silicate densifier
- polished concrete maintenance
Floor Repair & Joint Filling
Joint filling is the highest-return maintenance work in any building with hard-wheeled traffic, and it is almost always deferred until the damage costs ten times what the filler would have. Here is the mechanism. A control joint is a deliberate gap.
- concrete floor joint repair
- semi rigid joint filler
- warehouse joint edge repair
- spall repair concrete floor
- epoxy crack injection floor
- polyurea joint filler
- forklift damage floor repair
- control joint filling
- floor divot repair
- delaminated coating removal
- slab surface restoration
- dock plate area repair
Line Striping & Safety Marking
Fresno Elite Epoxy Flooring stripes warehouse floors across the Central Valley logistics belt under heat and dust. Dust and pallet traffic erase weak paint before the next safety walk. Open docks pull ag grit across fresh lines if tire polish was never ground away.
- warehouse line striping
- floor safety marking
- OSHA aisle marking
- epoxy floor striping
- pedestrian walkway marking
- forklift aisle lines
- floor stencils and lettering
- hazard striping floor
- 5S floor marking
- floor tape alternative
- plant safety line painting
- color coded floor zones
Garage Floor Coatings
Fresno Elite Epoxy Flooring coats Central Valley garages that bake in summer and take dust and hard-water drip all year long. Valley heat turns a closed garage into an oven by late afternoon from spring through early fall on most lots. Tire pickup and UV at the door edge kill thin coatings quickly under clear sky.
- garage floor coating
- epoxy garage floor
- polyaspartic garage floor
- garage floor flake system
- hot tire resistant coating
- one day garage floor
- oil resistant garage floor
- residential floor coating
- shop floor coating
- garage floor resurfacing
- garage floor installer
Flake Floor Systems
Fresno Elite Epoxy Flooring installs flake epoxy floors for Valley garages and light commercial bays that want hide-the-dust texture. Flake is popular here because valley dust and hard-water spots show less than on a solid field under bright afternoon light. That only works if grind and moisture checks come first.
- flake floor system
- chip epoxy floor
- full broadcast flake
- vinyl flake flooring
- decorative chip floor
- flake floor colors
- commercial flake flooring
- slip resistant flake floor
- 1/4 inch flake blend
- flake over concrete
- flake floor for shops
Metallic Epoxy Floors
Fresno Elite Epoxy Flooring installs metallic epoxy for Valley showrooms and feature rooms that want movement under hard daylight. Metallic pigment behaves differently under Central Valley sun than under soft coastal light. Swirls that look deep at 8 a.m.
- metallic epoxy floor
- metallic epoxy garage
- 3d metallic flooring
- pearlescent epoxy floor
- marble look epoxy floor
- showroom metallic floor
- designer resin floor
- reflector enhancer floor
- metallic floor installer
- tasting room floor
- restaurant metallic floor
Polyaspartic & Polyurea Coatings
Polyaspartic and polyurea coatings solve the two problems epoxy cannot: sunlight and downtime. Polyaspartic is an aliphatic polyurea, and aliphatic chemistry does not amber under ultraviolet light the way epoxy inevitably does, so any floor that sees sun through a roll-up door, a skylight or a storefront window needs one on top or it will yellow and eventually chalk. That is inherent to the epoxy resin and no amount of quality changes it.
- polyaspartic floor coating
- polyurea floor coating
- one day floor coating
- fast cure floor system
- UV stable topcoat
- polyaspartic vs epoxy
- cold temperature floor coating
- flexible floor coating
- high abrasion topcoat
- same day return to service
- crack bridging coating
Commercial Epoxy Flooring
Fresno Elite Epoxy Flooring builds commercial epoxy floors for Valley offices, retail back-of-house, and light industrial suites under hard sun and dust. Valley commercial slabs face dust infiltration, irrigation-driven moisture swings, and brutal afternoon heat through glass. We grind flat, control application air, and moisture-test after water season so solid or low-texture commercial fields do not blister a month after turnover.
- commercial epoxy flooring
- commercial floor coating contractor
- office floor coating
- gym floor coating
- tenant improvement floor coating
- VCT and mastic removal
- commercial epoxy per square foot
- night and weekend floor installation
- phased commercial floor coating
- low odor fast cure floor coating
- commercial concrete floor coating
- epoxy floor coating installers
Commercial Kitchen & Restaurant Floors
Commercial kitchen flooring gets judged by a health inspector at the wall junction and by your own crew at the dish pit, and those two audiences want different things from the same slab.
Fresno kitchens usually fail the first test, because quarry tile grout is porous and once the joints open the floor becomes a reservoir for grease and organic soil that no mop reaches.
The code language is worth knowing before you take a bid, because it is effectively the design brief: the floor has to be smooth, durable, non-absorbent, easily cleanable, and coved where it meets the wall so there is no square corner for soil to pack into.
- commercial kitchen flooring
- restaurant kitchen floor coating
- urethane mortar kitchen floor
- quarry tile replacement flooring
- health code kitchen floor
- integral cove base flooring
- grease resistant floor coating
- slip resistant kitchen floor
- trench drain floor detailing
- overnight kitchen floor installation
- school kitchen flooring
- bakery floor coating
- dish pit floor coating
- commissary kitchen flooring
Showroom, Retail & Office Floors
Fresno Elite Epoxy Flooring installs showroom and retail floors that must stay clean under bright Valley light and steady daily foot traffic. Retail slabs take dust, winter mud, and hard sun through storefront glass across long clear afternoons. A floor that looks even at dawn can glare and show every swirl by noon under Valley sky.
- showroom floor coating
- retail floor coating
- metallic showroom floor
- polished concrete retail floor
- car dealership floor coating
- office lobby floor coating
- gym floor coating
- high gloss epoxy floor
- light reflectance floor coating
- decorative concrete showroom
- after hours retail floor installation
- salon floor coating
- restaurant dining room floor
- flake floor showroom
Solid Color Epoxy Coatings
Fresno Elite Epoxy Flooring pours solid-color epoxy when Valley clients want a simple, clean field without broadcast texture. A solid field is a prep exam under clear Central Valley light. Every grind mark and dust nib shows by noon if application air was dirty.
- solid color epoxy floor coating
- solid color epoxy
- epoxy floor coating colors
- gray epoxy floor coating
- 100% solids epoxy
- high build epoxy coating
- safety color floor marking
- mechanical room floor coating
- dry storage floor coating
- single color garage floor epoxy
- epoxy floor color chart
- solid color vs flake epoxy
- tinted epoxy floor coating
Patio & Pool Deck Coatings
Pool deck and patio coatings are the one corner of this trade where the wrong resin fails on schedule, and in Fresno the wrong resin is standard epoxy.
Epoxy is an aromatic chemistry, so ultraviolet light ambers it and eventually chalks it, and a smooth dark film on an exposed slab stores heat until nobody will cross it barefoot in July. What works outdoors here is an aliphatic system, polyaspartic or aliphatic urethane, built with texture, in a light color, over a slab that was actually prepared.
- pool deck coating
- concrete patio coating
- cool deck resurfacing
- outdoor concrete coating
- slip resistant pool deck
- textured patio coating
- UV stable outdoor coating
- patio flake coating
- knockdown texture overlay
- porch floor coating
- outdoor kitchen floor coating
- carport floor coating
- patio coating over cracked concrete
What Fresno property owners ask us
Which epoxy flooring services does Fresno Elite Epoxy Flooring handle?
Everything listed on this page, residential and commercial, across Fresno and the Central Valley. Work is done by our own crews rather than handed to whoever is cheapest that week, which is the only way the workmanship warranty means anything.
Can I combine more than one service in a single job?
Yes, and it is usually cheaper. Bundling epoxy flooring work into one mobilization saves setup, disposal and travel, and it means one crew, one schedule and one written free estimate instead of three contractors blaming each other.
Do you give free estimates for every service?
Every one. We come out, measure, look at the real condition of the work area, and put an itemized free estimate in writing with materials and scope spelled out. No charge, no deposit, and no obligation to book.
What Fresno Customers Say
They pulled up the failed epoxy in our wash-down room and put in urethane cement instead. Two seasons of hot sanitation later and it looks the same as the day they left. The last contractor never even asked what we process.
Metallic floor in our showroom gets a comment every single day. Clean crew, on schedule, and it wiped up spilled coffee like it was glass.
Coated the packing floor and filled every joint over a shutdown weekend so we did not lose a day of the run. Forklift lanes still have crisp joint edges, which is more than I can say for the old floor.
Freezer and cooler floors done right, including the dock transitions where the old coating always let go first. They explained exactly why it had been failing there and fixed the cause.
Communities We Serve
Fresno Elite Epoxy Flooring serves Fresno, CA and surrounding communities including: